plustek: help using a Canonscan LiDE 20
Subject:
help using a Canonscan LiDE 20
From:
Bret Comstock Waldow ####@####.####
Date:
3 Feb 2003 21:16:50 -0000
Message-Id: <1044306441.1253.14.camel@ganesha>
Hello,
I've been reading, and have tried following what I've read, but am not
getting it to work.
I have a Canoscan LiDE 20, a Thinkpad T21 with Redhat 8.0, upgraded with
latest patches. I am using the Redhat provided 2.4.18-19.8.0 kernel,
although I do have the source installed as well.
I've made the module and installed it from
plustek-module-0_42_9.tar.gz. There were no errors reported and the
build completed as did "make install".
However:
[root@ganesha temp]# modprobe pt_drv
/lib/modules/2.4.18-19.8.0/misc/pt_drv.o: init_module: Success
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-19.8.0/misc/pt_drv.o: insmod
/lib/modules/2.4.18-19.8.0/misc/pt_drv.o failed
/lib/modules/2.4.18-19.8.0/misc/pt_drv.o: insmod pt_drv failed
Can anyone tell me what I need to do?
Thanks in advance,
Bret
Here are some things I think would be relevant from what I've read:
[root@ganesha temp]# cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 eepro100
alias sound-slot-0 cs46xx
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
>/dev/null 2>&1 || :
alias usb-controller usb-uhci
# for Canonscan LiDE 20
options scanner vendor=0x04a9 product=0x220d
[root@ganesha plustek_driver]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=1860
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=04a9 ProdID=220d Rev= 1.00
S: Manufacturer=Canon
S: Product=CanoScan
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0461 ProdID=0813 Rev= 1.03
S: Manufacturer=IBM Japan Ltd.
S: Product=NB Cam
S: SerialNumber=00000004
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
[root@ganesha plustek_driver]# rpm --query sane-backends
sane-backends-1.0.8-5
[root@ganesha plustek_driver]# rpm --query sane-frontends
sane-frontends-1.0.8-4
