plustek: problem with Plustek 9636T/12000T parallel port scanner
Subject:
Re: problem with Plustek 9636T/12000T parallel port scanner
From:
Jacques Montier ####@####.####
Date:
1 Jul 2004 15:07:57 +0100
Message-Id: <40E41AB7.3040603@club-internet.fr>
Here it is :
I noticed that it worked fine as root, not as user..
May be is it a problem of permission...
[sanei_debug] Setting debug level of plustek_pp to 20.
[plustek_pp] PlustekPP backend V0.01-8, part of
sane-backends 1.0.14
[plustek_pp] ># Plustek-PP SANE Backend
configuration file<
[plustek_pp] ># For use with Plustek parallel-port
scanners<
[plustek_pp] >#<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># user either [direct] or [kernel]
to access the scanner<
[plustek_pp] ># when using [kernel], device
specifies the device-node, which is created<
[plustek_pp] ># by the kernel-module loader
(applies only to Linux)<
[plustek_pp] ># when using [direct], device is
used to set the parallel-port base address<
[plustek_pp] ># or a device-name suitable for
libieee1284, i.e. parport0<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] >device 0x378<
[plustek_pp] Decoding device name >0x378<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># leave the default values as
specified in /etc/modules.conf<
[plustek_pp] >#<
[plustek_pp] >option warmup -1<
[plustek_pp] Decoding option >warmup<
[plustek_pp] >option lOffOnEnd -1<
[plustek_pp] Decoding option >lOffOnEnd<
[plustek_pp] >option lampOff -1<
[plustek_pp] Decoding option >lampOff<
[plustek_pp] ><
[plustek_pp] ># model override switch, mostly for
cosmetic changes, if the autodetection<
[plustek_pp] ># does not work or could not work
correctly<
[plustek_pp] >#option mov 7<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner
via libieee1284<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] attach (0x378, 0xb273b660, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >0x378<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] open: PtDrvInit failed: 4
[plustek_pp] open failed: -1
[plustek_pp] >device parport0<
[plustek_pp] Decoding device name >parport0<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner
via the kernel module<
[plustek_pp] >#<
[plustek_pp] >#[kernel]<
[plustek_pp] >#device /dev/pt_drv<
[plustek_pp] >#<
[plustek_pp] >#option warmup -1<
[plustek_pp] >#option lOffOnEnd -1<
[plustek_pp] >#option lampOff -1<
[plustek_pp] attach (parport0, 0xb273b660, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >parport0<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] open: PtDrvInit failed: 11
[plustek_pp] open failed: -1
[plustek_pp] sane_get_devices (0xb273d72c, 0)
[plustek_pp] sane_exit
thank you
--
Jacques
