plustek: problem with Plustek 9636T/12000T parallel port scanner
Subject:
Re: problem with Plustek 9636T/12000T parallel port scanner
From:
Gerhard Jaeger ####@####.####
Date:
1 Jul 2004 15:14:57 +0100
Message-Id: <200407011614.27214.gerhard@gjaeger.de>
On Thursday 01 July 2004 16:07, Jacques Montier wrote:
> Here it is :
>
> I noticed that it worked fine as root, not as user..
> May be is it a problem of permission...
Hmmpf, yes of course, please set the permissions of /dev/parport0
correctly, I use:
crw-rw-rw- 1 root root 99, 0 2003-03-14 14:08 /dev/parport0
Ciao,
Gerhard
>
>
> [sanei_debug] Setting debug level of plustek_pp to 20.
> [plustek_pp] PlustekPP backend V0.01-8, part of
> sane-backends 1.0.14
> [plustek_pp] ># Plustek-PP SANE Backend
> configuration file<
> [plustek_pp] ># For use with Plustek parallel-port
> scanners<
> [plustek_pp] >#<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># user either [direct] or [kernel]
> to access the scanner<
> [plustek_pp] ># when using [kernel], device
> specifies the device-node, which is created<
> [plustek_pp] ># by the kernel-module loader
> (applies only to Linux)<
> [plustek_pp] ># when using [direct], device is
> used to set the parallel-port base address<
> [plustek_pp] ># or a device-name suitable for
> libieee1284, i.e. parport0<
> [plustek_pp] >#<
> [plustek_pp] >[direct]<
> [plustek_pp] >device 0x378<
> [plustek_pp] Decoding device name >0x378<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># leave the default values as
> specified in /etc/modules.conf<
> [plustek_pp] >#<
> [plustek_pp] >option warmup -1<
> [plustek_pp] Decoding option >warmup<
> [plustek_pp] >option lOffOnEnd -1<
> [plustek_pp] Decoding option >lOffOnEnd<
> [plustek_pp] >option lampOff -1<
> [plustek_pp] Decoding option >lampOff<
> [plustek_pp] ><
> [plustek_pp] ># model override switch, mostly for
> cosmetic changes, if the autodetection<
> [plustek_pp] ># does not work or could not work
> correctly<
> [plustek_pp] >#option mov 7<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># example for accessing the scanner
> via libieee1284<
> [plustek_pp] >#<
> [plustek_pp] >[direct]<
> [plustek_pp] attach (0x378, 0xb273b660, (nil))
> [plustek_pp] Device configuration:
> [plustek_pp] device name : >0x378<
> [plustek_pp] direct I/O : yes
> [plustek_pp] warmup : -1s
> [plustek_pp] lampOff : -1
> [plustek_pp] lampOffOnEnd : yes
> [plustek_pp] model override: 0
> [plustek_pp] ---------------------
> [plustek_pp] drvopen()
> [plustek_pp] open: PtDrvInit failed: 4
> [plustek_pp] open failed: -1
> [plustek_pp] >device parport0<
> [plustek_pp] Decoding device name >parport0<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># example for accessing the scanner
> via the kernel module<
> [plustek_pp] >#<
> [plustek_pp] >#[kernel]<
> [plustek_pp] >#device /dev/pt_drv<
> [plustek_pp] >#<
> [plustek_pp] >#option warmup -1<
> [plustek_pp] >#option lOffOnEnd -1<
> [plustek_pp] >#option lampOff -1<
> [plustek_pp] attach (parport0, 0xb273b660, (nil))
> [plustek_pp] Device configuration:
> [plustek_pp] device name : >parport0<
> [plustek_pp] direct I/O : yes
> [plustek_pp] warmup : -1s
> [plustek_pp] lampOff : -1
> [plustek_pp] lampOffOnEnd : yes
> [plustek_pp] model override: 0
> [plustek_pp] ---------------------
> [plustek_pp] drvopen()
> [plustek_pp] open: PtDrvInit failed: 11
> [plustek_pp] open failed: -1
> [plustek_pp] sane_get_devices (0xb273d72c, 0)
> [plustek_pp] sane_exit
>
> thank you
