plustek: how to put the lamp off ?
Subject:
Re: Fwd: WG: how to put the lamp off ?
From:
Gerhard Jaeger ####@####.####
Date:
20 Jul 2004 16:31:01 +0100
Message-Id: <200407201730.27336.gerhard@gjaeger.de>
Hi Jacques,
try the following plustek_pp.conf:
[direct]
device parport0
option warmup 30
option lOffOnEnd 1
option lampOff 180
This should fix your problem.
Ciao,
Gerhard
On Tuesday 20 July 2004 12:20, Jacques Montier wrote:
> Gerhard Jaeger a écrit :
> > Hi,
> > When you're using the module, then your plustek_pp.conf will not work!
> > Can you please send the output of the following command to the list:
> > export SANE_DEBUG_PLUSTEK_PP=20 ; scanimage -L
> >
> > You might also change
> > option lOffOnEnd 1
> > option lampOff 180
> >
> > Ciao,
> > Gerhard
>
> Hi,
>
> Here it is,
>
> [plustek_pp] PlustekPP backend V0.01-8, part of
> sane-backends 1.0.14
> [plustek_pp] ># Plustek-PP SANE Backend
> configuration file<
> [plustek_pp] ># For use with Plustek parallel-port
> scanners<
> [plustek_pp] >#<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># user either [direct] or [kernel]
> to access the scanner<
> [plustek_pp] ># when using [kernel], device
> specifies the device-node, which is created<
> [plustek_pp] ># by the kernel-module loader
> (applies only to Linux)<
> [plustek_pp] ># when using [direct], device is
> used to set the parallel-port base address<
> [plustek_pp] ># or a device-name suitable for
> libieee1284, i.e. parport0<
> [plustek_pp] >#<
> [plustek_pp] >[direct]<
> [plustek_pp] >device 0x378<
> [plustek_pp] Decoding device name >0x378<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># leave the default values as
> specified in /etc/modules.conf<
> [plustek_pp] >#<
> [plustek_pp] >option warmup -1<
> [plustek_pp] Decoding option >warmup<
> [plustek_pp] >option lOffOnEnd -1<
> [plustek_pp] Decoding option >lOffOnEnd<
> [plustek_pp] >option lampOff -1<
> [plustek_pp] Decoding option >lampOff<
> [plustek_pp] ><
> [plustek_pp] ># model override switch, mostly for
> cosmetic changes, if the autodetection<
> [plustek_pp] ># does not work or could not work
> correctly<
> [plustek_pp] >#option mov 7<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># example for accessing the scanner
> via libieee1284<
> [plustek_pp] >#<
> [plustek_pp] >[direct]<
> [plustek_pp] attach (0x378, 0xbfffc2d0, (nil))
> [plustek_pp] Device configuration:
> [plustek_pp] device name : >0x378<
> [plustek_pp] direct I/O : yes
> [plustek_pp] warmup : -1s
> [plustek_pp] lampOff : -1
> [plustek_pp] lampOffOnEnd : yes
> [plustek_pp] model override: 0
> [plustek_pp] ---------------------
> [plustek_pp] drvopen()
> [plustek_pp] open: PtDrvInit failed: 4
> [plustek_pp] open failed: -1
> [plustek_pp] >device parport0<
> [plustek_pp] Decoding device name >parport0<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># example for accessing the scanner
> via the kernel module<
> [plustek_pp] >#<
> [plustek_pp] >#[kernel]<
> [plustek_pp] >#device /dev/pt_drv<
> [plustek_pp] ><
> [plustek_pp] >#option warmup -1<
> [plustek_pp] >#option lOffOnEnd -1<
> [plustek_pp] >#option lampOff -1<
> [plustek_pp] attach (parport0, 0xbfffc2d0, (nil))
> [plustek_pp] Device configuration:
> [plustek_pp] device name : >parport0<
> [plustek_pp] direct I/O : yes
> [plustek_pp] warmup : -1s
> [plustek_pp] lampOff : -1
> [plustek_pp] lampOffOnEnd : yes
> [plustek_pp] model override: 0
> [plustek_pp] ---------------------
> [plustek_pp] drvopen()
> [plustek_pp] ptdrvInit(0)
> [plustek_pp] Init settings done
> [plustek_pp] ScanData = 0x08053f38
> [plustek_pp] Assigning port handle 0
> [plustek_pp] ptdrvOpen(port=0x0)
> [plustek_pp] Try to claim the parport
> [plustek_pp] Setting SPP-mode
> [plustek_pp] Setting PS/2-mode
> [plustek_pp] Setting EPP-mode
> [plustek_pp] We're using libIEEE1284 I/O
> [plustek_pp] Starting Scanner-Autodetection
> [plustek_pp] ************ DETECTP48xx ************
> [plustek_pp] ModelSet4800()
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet4800() done.
> [plustek_pp] P48xxInitAsic()
> [plustek_pp] DacInitialize()
> [plustek_pp] ImageInitialize()
> [plustek_pp] IOFuncInitialize()
> [plustek_pp] IOInitialize()
> [plustek_pp] * using readfunction >fnEPPRead<
> [plustek_pp] MotorInitialize()
> [plustek_pp] ResetPort()
> [plustek_pp] Test 0x55
> [plustek_pp] Test 0xAA
> [plustek_pp] Compare data=0x40 and status=0x50,
> port=0x0
> [plustek_pp] p48xxReadWriteTest()
> [plustek_pp] Can't find your model, asic = 0x5a
> [plustek_pp] detectScannerConnection() returns -9031.
> [plustek_pp] ************* ASIC9800x *************
> [plustek_pp] ResetPort()
> [plustek_pp] IOInitialize()
> [plustek_pp] * using readfunction >fnEPPRead<
> [plustek_pp] ASIC = 0x81
> [plustek_pp] ************* ASIC98001 *************
> [plustek_pp] ModelSet9636()
> [plustek_pp] ModelSet9360()
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet9630() done.
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet9636() done.
> [plustek_pp] P9636InitAsic()
> [plustek_pp] DacInitialize()
> [plustek_pp] ImageInitialize()
> [plustek_pp] IOFuncInitialize()
> [plustek_pp] IOInitialize()
> [plustek_pp] * using readfunction >fnEPPRead<
> [plustek_pp] MotorInitialize()
> [plustek_pp] 0x81
> [plustek_pp] CCID = 0x00
> [plustek_pp] P9636InitAsic() done.
> [plustek_pp] ResetPort()
> [plustek_pp] Test 0x55
> [plustek_pp] Test 0xAA
> [plustek_pp] Compare data=0x40 and status=0x10,
> port=0x0
> [plustek_pp] ioP98ReadWriteTest()
> [plustek_pp] Putting Scanner (ASIC 98001) into
> Idle-Mode
> [plustek_pp] detectScannerConnection() returns 0.
> [plustek_pp] p9636InitP98001(0)
> [plustek_pp] bData = 0x0000, PCB-ID = 0x00
> [plustek_pp] CCD-ID = 0x00 = _CCD_3797
> [plustek_pp] bSetScanModeFlag = 0
> [plustek_pp] *** setupBuffers ***
> [plustek_pp] Driverbuf(147360 bytes) needed !
> [plustek_pp] pColorRunTab = 0x4007f534 - 0x4007efa8
> [plustek_pp] Adjust for 98001 ASIC
> [plustek_pp] sb2 = 0x4005b008, sb1 = 0x40065be8,
> Color = 0x40075db8
> [plustek_pp] Pro = 0x4007b3a8, size = 147360
> [plustek_pp] *** DETECTION DONE, result: 0 ***
> [plustek_pp] Switching lamp 0 on.
> [plustek_pp] ptdrvClose()
> [plustek_pp] *** cleanup buffers ***
> [plustek_pp] MiscRestorePort()
> [plustek_pp] Releasing parport
> [plustek_pp] MiscGetModelName - id = 15
> [plustek_pp] pt_drv0: 9636T/12000T found
> [plustek_pp] pt_drv0: Lamp-Timer set to 180 seconds.
> [plustek_pp] pt_drv0: WarmUp period set to 30 seconds.
> [plustek_pp] pt_drv0: Lamp untouched on driver unload.
> [plustek_pp] Lamp-Timer started!
> [plustek_pp] ioctl(_PTDRV_OPEN_DEVICE)
> [plustek_pp] Lamp-Timer stopped!
> [plustek_pp] Init settings done
> [plustek_pp] ptdrvOpen(port=0x0)
> [plustek_pp] Try to claim the parport
> [plustek_pp] Setting SPP-mode
> [plustek_pp] Setting PS/2-mode
> [plustek_pp] Setting EPP-mode
> [plustek_pp] We're using libIEEE1284 I/O
> [plustek_pp] Starting Scanner-detection (ASIC 98001)
> [plustek_pp] ************* ASIC98001 *************
> [plustek_pp] ModelSet9636()
> [plustek_pp] ModelSet9360()
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet9630() done.
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet9636() done.
> [plustek_pp] P9636InitAsic()
> [plustek_pp] DacInitialize()
> [plustek_pp] ImageInitialize()
> [plustek_pp] IOFuncInitialize()
> [plustek_pp] IOInitialize()
> [plustek_pp] * using readfunction >fnEPPRead<
> [plustek_pp] MotorInitialize()
> [plustek_pp] 0x81
> [plustek_pp] CCID = 0x00
> [plustek_pp] P9636InitAsic() done.
> [plustek_pp] ResetPort()
> [plustek_pp] Test 0x55
> [plustek_pp] Test 0xAA
> [plustek_pp] Compare data=0x40 and status=0x10,
> port=0x0
> [plustek_pp] ioP98ReadWriteTest()
> [plustek_pp] Putting Scanner (ASIC 98001) into
> Idle-Mode
> [plustek_pp] detectScannerConnection() returns 0.
> [plustek_pp] p9636InitP98001(0)
> [plustek_pp] bData = 0x0000, PCB-ID = 0x00
> [plustek_pp] CCD-ID = 0x00 = _CCD_3797
> [plustek_pp] bSetScanModeFlag = 0
> [plustek_pp] *** setupBuffers ***
> [plustek_pp] Driverbuf(147360 bytes) needed !
> [plustek_pp] pColorRunTab = 0x4007f534 - 0x4007efa8
> [plustek_pp] Adjust for 98001 ASIC
> [plustek_pp] sb2 = 0x4005b008, sb1 = 0x40065be8,
> Color = 0x40075db8
> [plustek_pp] Pro = 0x4007b3a8, size = 147360
> [plustek_pp] *** DETECTION DONE, result: 0 ***
> [plustek_pp] ioctl(_PTDRV_ADJUST)
> [plustek_pp] Adjusting device 0
> [plustek_pp] warmup: -1
> [plustek_pp] lampOff: -1
> [plustek_pp] lampOffOnEnd: -1
> [plustek_pp] ioctl(_PTDRV_GET_CAPABILITES)
> [plustek_pp] ioctl(_PTDRV_GET_LENSINFO)
> [plustek_pp] Scanner information:
> [plustek_pp] Vendor : Plustek
> [plustek_pp] Model : 9636T/12000T
> [plustek_pp] Asic : 0x81
> [plustek_pp] Flags : 0x00000280
> [plustek_pp] Version: 0x00002c00
> [plustek_pp] drvclose()
> [plustek_pp] ioctl(_PTDRV_STOP_SCAN)
> [plustek_pp] Waiting for Sensor to be back in position
> [plustek_pp] - done !
> [plustek_pp] ioctl(_PTDRV_CLOSE_DEVICE)
> [plustek_pp] *** cleanup buffers ***
> [plustek_pp] Putting Scanner (ASIC 98001) into
> Idle-Mode
> [plustek_pp] Lamp-Timer started!
> [plustek_pp] ptdrvClose()
> [plustek_pp] MiscRestorePort()
> [plustek_pp] Releasing parport
> [plustek_pp] attach: model = >9636T/12000T<
> [plustek_pp] sane_get_devices (0xbfffe39c, 0)
> device `v4l:/dev/video0' is a Noname Philips 675
> webcam virtual device
> device `plustek_pp:parport0' is a Plustek
> 9636T/12000T parallel port flatbed scanner
> [plustek_pp] sane_exit
> [plustek_pp] ptdrvShutdown()
> [plustek_pp] cleanup device 0
> [plustek_pp] Lamp-Timer stopped!
> [plustek_pp] Try to claim the parport
> [plustek_pp] Putting Scanner (ASIC 98001) into
> Idle-Mode
> [plustek_pp] Releasing parport
>
>
> Thanks
