plustek: how to put the lamp off ?
Subject:
Re: Fwd: WG: how to put the lamp off ?
From:
Jacques Montier ####@####.####
Date:
20 Jul 2004 11:20:37 +0100
Message-Id: <40FCF1F1.70405@club-internet.fr>
Gerhard Jaeger a écrit :
> Hi,
> When you're using the module, then your plustek_pp.conf will not work!
> Can you please send the output of the following command to the list:
> export SANE_DEBUG_PLUSTEK_PP=20 ; scanimage -L
>
> You might also change
> option lOffOnEnd 1
> option lampOff 180
>
> Ciao,
> Gerhard
Hi,
Here it is,
[plustek_pp] PlustekPP backend V0.01-8, part of
sane-backends 1.0.14
[plustek_pp] ># Plustek-PP SANE Backend
configuration file<
[plustek_pp] ># For use with Plustek parallel-port
scanners<
[plustek_pp] >#<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># user either [direct] or [kernel]
to access the scanner<
[plustek_pp] ># when using [kernel], device
specifies the device-node, which is created<
[plustek_pp] ># by the kernel-module loader
(applies only to Linux)<
[plustek_pp] ># when using [direct], device is
used to set the parallel-port base address<
[plustek_pp] ># or a device-name suitable for
libieee1284, i.e. parport0<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] >device 0x378<
[plustek_pp] Decoding device name >0x378<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># leave the default values as
specified in /etc/modules.conf<
[plustek_pp] >#<
[plustek_pp] >option warmup -1<
[plustek_pp] Decoding option >warmup<
[plustek_pp] >option lOffOnEnd -1<
[plustek_pp] Decoding option >lOffOnEnd<
[plustek_pp] >option lampOff -1<
[plustek_pp] Decoding option >lampOff<
[plustek_pp] ><
[plustek_pp] ># model override switch, mostly for
cosmetic changes, if the autodetection<
[plustek_pp] ># does not work or could not work
correctly<
[plustek_pp] >#option mov 7<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner
via libieee1284<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] attach (0x378, 0xbfffc2d0, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >0x378<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] open: PtDrvInit failed: 4
[plustek_pp] open failed: -1
[plustek_pp] >device parport0<
[plustek_pp] Decoding device name >parport0<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner
via the kernel module<
[plustek_pp] >#<
[plustek_pp] >#[kernel]<
[plustek_pp] >#device /dev/pt_drv<
[plustek_pp] ><
[plustek_pp] >#option warmup -1<
[plustek_pp] >#option lOffOnEnd -1<
[plustek_pp] >#option lampOff -1<
[plustek_pp] attach (parport0, 0xbfffc2d0, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >parport0<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] ptdrvInit(0)
[plustek_pp] Init settings done
[plustek_pp] ScanData = 0x08053f38
[plustek_pp] Assigning port handle 0
[plustek_pp] ptdrvOpen(port=0x0)
[plustek_pp] Try to claim the parport
[plustek_pp] Setting SPP-mode
[plustek_pp] Setting PS/2-mode
[plustek_pp] Setting EPP-mode
[plustek_pp] We're using libIEEE1284 I/O
[plustek_pp] Starting Scanner-Autodetection
[plustek_pp] ************ DETECTP48xx ************
[plustek_pp] ModelSet4800()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4800() done.
[plustek_pp] P48xxInitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnEPPRead<
[plustek_pp] MotorInitialize()
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x40 and status=0x50,
port=0x0
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Can't find your model, asic = 0x5a
[plustek_pp] detectScannerConnection() returns -9031.
[plustek_pp] ************* ASIC9800x *************
[plustek_pp] ResetPort()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnEPPRead<
[plustek_pp] ASIC = 0x81
[plustek_pp] ************* ASIC98001 *************
[plustek_pp] ModelSet9636()
[plustek_pp] ModelSet9360()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9630() done.
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9636() done.
[plustek_pp] P9636InitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnEPPRead<
[plustek_pp] MotorInitialize()
[plustek_pp] 0x81
[plustek_pp] CCID = 0x00
[plustek_pp] P9636InitAsic() done.
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x40 and status=0x10,
port=0x0
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Putting Scanner (ASIC 98001) into
Idle-Mode
[plustek_pp] detectScannerConnection() returns 0.
[plustek_pp] p9636InitP98001(0)
[plustek_pp] bData = 0x0000, PCB-ID = 0x00
[plustek_pp] CCD-ID = 0x00 = _CCD_3797
[plustek_pp] bSetScanModeFlag = 0
[plustek_pp] *** setupBuffers ***
[plustek_pp] Driverbuf(147360 bytes) needed !
[plustek_pp] pColorRunTab = 0x4007f534 - 0x4007efa8
[plustek_pp] Adjust for 98001 ASIC
[plustek_pp] sb2 = 0x4005b008, sb1 = 0x40065be8,
Color = 0x40075db8
[plustek_pp] Pro = 0x4007b3a8, size = 147360
[plustek_pp] *** DETECTION DONE, result: 0 ***
[plustek_pp] Switching lamp 0 on.
[plustek_pp] ptdrvClose()
[plustek_pp] *** cleanup buffers ***
[plustek_pp] MiscRestorePort()
[plustek_pp] Releasing parport
[plustek_pp] MiscGetModelName - id = 15
[plustek_pp] pt_drv0: 9636T/12000T found
[plustek_pp] pt_drv0: Lamp-Timer set to 180 seconds.
[plustek_pp] pt_drv0: WarmUp period set to 30 seconds.
[plustek_pp] pt_drv0: Lamp untouched on driver unload.
[plustek_pp] Lamp-Timer started!
[plustek_pp] ioctl(_PTDRV_OPEN_DEVICE)
[plustek_pp] Lamp-Timer stopped!
[plustek_pp] Init settings done
[plustek_pp] ptdrvOpen(port=0x0)
[plustek_pp] Try to claim the parport
[plustek_pp] Setting SPP-mode
[plustek_pp] Setting PS/2-mode
[plustek_pp] Setting EPP-mode
[plustek_pp] We're using libIEEE1284 I/O
[plustek_pp] Starting Scanner-detection (ASIC 98001)
[plustek_pp] ************* ASIC98001 *************
[plustek_pp] ModelSet9636()
[plustek_pp] ModelSet9360()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9630() done.
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9636() done.
[plustek_pp] P9636InitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnEPPRead<
[plustek_pp] MotorInitialize()
[plustek_pp] 0x81
[plustek_pp] CCID = 0x00
[plustek_pp] P9636InitAsic() done.
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x40 and status=0x10,
port=0x0
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Putting Scanner (ASIC 98001) into
Idle-Mode
[plustek_pp] detectScannerConnection() returns 0.
[plustek_pp] p9636InitP98001(0)
[plustek_pp] bData = 0x0000, PCB-ID = 0x00
[plustek_pp] CCD-ID = 0x00 = _CCD_3797
[plustek_pp] bSetScanModeFlag = 0
[plustek_pp] *** setupBuffers ***
[plustek_pp] Driverbuf(147360 bytes) needed !
[plustek_pp] pColorRunTab = 0x4007f534 - 0x4007efa8
[plustek_pp] Adjust for 98001 ASIC
[plustek_pp] sb2 = 0x4005b008, sb1 = 0x40065be8,
Color = 0x40075db8
[plustek_pp] Pro = 0x4007b3a8, size = 147360
[plustek_pp] *** DETECTION DONE, result: 0 ***
[plustek_pp] ioctl(_PTDRV_ADJUST)
[plustek_pp] Adjusting device 0
[plustek_pp] warmup: -1
[plustek_pp] lampOff: -1
[plustek_pp] lampOffOnEnd: -1
[plustek_pp] ioctl(_PTDRV_GET_CAPABILITES)
[plustek_pp] ioctl(_PTDRV_GET_LENSINFO)
[plustek_pp] Scanner information:
[plustek_pp] Vendor : Plustek
[plustek_pp] Model : 9636T/12000T
[plustek_pp] Asic : 0x81
[plustek_pp] Flags : 0x00000280
[plustek_pp] Version: 0x00002c00
[plustek_pp] drvclose()
[plustek_pp] ioctl(_PTDRV_STOP_SCAN)
[plustek_pp] Waiting for Sensor to be back in position
[plustek_pp] - done !
[plustek_pp] ioctl(_PTDRV_CLOSE_DEVICE)
[plustek_pp] *** cleanup buffers ***
[plustek_pp] Putting Scanner (ASIC 98001) into
Idle-Mode
[plustek_pp] Lamp-Timer started!
[plustek_pp] ptdrvClose()
[plustek_pp] MiscRestorePort()
[plustek_pp] Releasing parport
[plustek_pp] attach: model = >9636T/12000T<
[plustek_pp] sane_get_devices (0xbfffe39c, 0)
device `v4l:/dev/video0' is a Noname Philips 675
webcam virtual device
device `plustek_pp:parport0' is a Plustek
9636T/12000T parallel port flatbed scanner
[plustek_pp] sane_exit
[plustek_pp] ptdrvShutdown()
[plustek_pp] cleanup device 0
[plustek_pp] Lamp-Timer stopped!
[plustek_pp] Try to claim the parport
[plustek_pp] Putting Scanner (ASIC 98001) into
Idle-Mode
[plustek_pp] Releasing parport
Thanks
--
Jacques
