plustek: Plustek OpticPro 96000P
Subject:
Re: Plustek OpticPro 96000P
From:
Patrick Gilliland ####@####.####
Date:
28 Nov 2004 12:19:49 +0000
Message-Id: <1101644426.2622.7.camel@localhost.localdomain>
I'm not sure if this is relevant. On my 9600, I get reasonable scans but
with very fine alternating cyan and magenta lines much like the
right-lower portion of Markus' png. This occurs on Linux and win98 and
when connected to two different machines. I have changed cables to no
effect. I regretfully assume it is the 9600's hardware failing and not
any of the drivers.
On Sun, 2004-11-28 at 02:47, Markus Ehrnsperger wrote:
> Hi Gerhard,
>
> thanks for analysing the problem. I tried out your suggestions (SPP mode and
> correct settings for parport_pc), but that didn't help.
>
> Then I installed Win98 und the original plustek driver. And it still didn't
> work. So I assume the paralell port built in the mainboard is corrupted.
>
> So I connected the scanner to a PCI parallel port (EX-41011) and now the
> scanner is recognised. But, when I scan, the result does not even resemble
> the original, so the scan seems corrupted. This is the same in Win98 and in
> linux. I attach one of these scans (It is a small part of the scan since this
> mailing list doesn't except large files, but that shouldn't matter since the
> whole picture looks very similar).
>
> Any Idea?
>
> Markus
>
>
>
> ______________________________________________________________________
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
