primax: Can not identify this scanner. code: 0e
Subject:
Re: Can not identify this scanner. code: 0e
From:
"J. v. Santen" ####@####.####
Date:
7 Apr 2000 18:37:54 -0000
Message-Id: <000701bfa0be$baf96480$0501a8c0@athome>
>Hi Joshua,
>
>thanks a lot for your replies. In the meantime I had some
>private e-mails with Th. Schano and Chr. Ording.
>
>It turned out that my EICI 091000 ASIC and WM 8143-12 ADC is
>not supported by the primax_scan software.
>
>If your problem persists, it may be worth opening the
>scanner and have a look at the PCB. If you find an
>EICI 072100 or EICI 085900 with LM9811 ADC you have
>good chances that your scanner is supported. If not,
>you are in no-support land.
-----------------------------------------------------------
Hai Juergen,
I'm sorry to hear that for you.
Yes, my problem still persists, and I already had a look in my scanner
before and the part#'s are:
EICI 085900 (f98120177, ASYM 087680m / y1832000145080)
LM9811 (s9806ba)
EICI 080300 (9811)
74HC244A
62003F TD810
only a different memory chip:
ISSI IS 61C1024-15J E175 6700L 9808
and a small one: 74HC04D
As compared to the partnumber page on the diver site they are identical to
the original, so I don't know where to look for my problem and probably
nobody else does, because I still have not received any comments. So I guess
I have si and wait for some support of Primax or buy a new one.
Thanks for your replies too.
Joshua
