nanogui: how to run microwin with console!
Subject:
Re: [nanogui] how to run microwin with console!
From:
Jordan Crouse ####@####.####
Date:
15 Aug 2001 14:35:21 -0000
Message-Id: <01081508353504.21329@cosmic>
On the ipaq, lots of people have chosen to set up a NFS mount to a toolchain,
and then do the compiling that way.
Personally, I quickly go back and forth from editing to compiling (shotgun
style...), so I would get very frustrated by editing on my desktop and then
copying over to the handheld and building. Its much easier just to switch to
a terminal. Cross compilers are very effective, so why not?
Jordan
On Wednesday 15 August 2001 08:19, Gray, Tim mentioned:
> Actually I find it quite useful to do some compiles on the prototype
> hardware. Granted I'm working on a set-top box so I have massive amounts of
> room and power compared to a handheld device (64meg ram,intel P166,2gig
> hard drive in place of the flash drive) but I find it easier to push the
> limits of the hardware's capability when I can perform a small recompile on
> the target.
>
> In a handheld, how would you even get GCC installed.
>
>
> -----Original Message-----
> From: Jordan Crouse ####@####.####
> Sent: Wednesday, August 15, 2001 10:13 AM
> To: zhang jijun; ####@####.####
> Subject: Re: [nanogui] how to run microwin with console!
>
>
> Normally, you do all your building on a desktop with a cross compiler. Its
> usually not good to acutally compile the programs on the target device.
>
> On Tuesday 14 August 2001 20:25, zhang jijun mentioned:
> > My dear Friend:
> > I am working with microwindows-0.89pre7 ,I have some question with
> > microwin ,Please tell me immediately or I can't continue my work.
> > one question is: I am going to run microwindow on 160*160 TFT,so I will
> > run microwin with console,but I don't know how to configure and make?
> > the other is: I have programed a program that is to show the file
> > directory and the file name but I can't to select the directory to up and
> > down this directory or the file to operate with the light bar that should
> > be controled with keyboard .Please tell me how to do with what function?
>
> if
>
> > you have some demos about the file operation that we can select one file
> > and can copy or delete the selected file plese send me !
> >
> >
> > BEST REGARDS!
> >
> > _________________________________________________________________
> > Äú¿ÉÒÔÔÚ MSN Hotmail Õ¾µã http://www.hotmail.com/cn Ãâ·ÑÊÕ·¢µç×ÓÓʼþ
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: ####@####.####
> > For additional commands, e-mail: ####@####.####
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
