plustek: Canon N670U stops during scanning
Subject:
Re: Canon N670U stops during scanning
From:
Capers ####@####.####
Date:
31 Dec 2002 13:13:05 -0000
Message-Id: <20021231130533.DEVJ900.mta05-svc.ntlworld.com@[10.137.100.64]>
>
> From: "Craig Cooper" ####@####.####
> Date: 2002/12/31 Tue AM 09:42:21 GMT
> To: ####@####.####
> Subject: Re: Canon N670U stops during scanning
>
> Hi,
>
> I am using freshly compiled sane109 and test4 with 670U very successfully.
>
> The trick I used was to do all the steps, and use YaST2 or DrakConf to
> install new scanner (right, drakconf doesn't like plusteks). Once this is
> done, RE-EDIT the plustek.conf file. There should be some more options there
> for platter size etc (defaults are fine - full A4 size). Also, turn warmup
> to 0.
>
> Hope this helps (?) or try test4
Would it be possible to take a look at your plustek.conf file?
I may go back to TEST4 today, and see if that helps.
One further note: I only have a dual P2 300MHz (A Dell Workstation 400). Is this sufficient to handle the processing requirement?
- Martyn Capewell
