plustek: Plustek OpticPro 96000P
Subject:
Plustek OpticPro 96000P
From:
Markus Ehrnsperger ####@####.####
Date:
11 Nov 2004 20:22:21 +0000
Message-Id: <200411112121.28713.Markus_Ehrnsperger@yahoo.de>
Hello,
my paralell port scanner (Plustek OpticPro 96000P) is not working. The lamp
goes on, but noting else happens. When running scanimage, I get:
./scanimage -d plustek_pp:/dev/parport0 > xx.png
[sanei_debug] Setting debug level of plustek_pp to 200000.
[plustek_pp] PlustekPP backend V0.43-5, part of sane-backends 1.0.15-pre2
[plustek_pp] ># Plustek-PP SANE Backend configuration file<
[plustek_pp] ># For use with Plustek parallel-port scanners<
[plustek_pp] >#<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># user either [direct] or [kernel] to access the scanner<
[plustek_pp] ># when using [kernel], device specifies the device-node, which
is created<
[plustek_pp] ># by the kernel-module loader (applies only to Linux)<
[plustek_pp] ># when using [direct], device is used to set the parallel-port
base address<
[plustek_pp] ># or a device-name suitable for libieee1284, i.e. parport0<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] >device parport0<
[plustek_pp] Decoding device name >parport0<
[plustek_pp] >#option forceMode 4<
[plustek_pp] >option Mode 4<
[plustek_pp] >option lampOff 180<
[plustek_pp] Decoding option >lampOff<
[plustek_pp] >option warmup 15<
[plustek_pp] Decoding option >warmup<
[plustek_pp] >#option port 0x378<
[plustek_pp] >option lOffOnEnd 0<
[plustek_pp] Decoding option >lOffOnEnd<
[plustek_pp] >option mov 0<
[plustek_pp] Decoding option >mov<
[plustek_pp] >#option slowIO 1<
[plustek_pp] ><
[plustek_pp] ><
[plustek_pp] attach (parport0, 0xbfff3fb0, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >parport0<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : 15s
[plustek_pp] lampOff : 180
[plustek_pp] lampOffOnEnd : no
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] ptdrvInit(0)
[plustek_pp] Init settings done
[plustek_pp] ScanData = 0x08052bc0
[plustek_pp] Assigning port handle 0
[plustek_pp] ptdrvOpen(port=0x0)
[plustek_pp] Try to claim the parport
[plustek_pp] Setting SPP-mode
[plustek_pp] Setting PS/2-mode
[plustek_pp] Setting EPP-mode
[plustek_pp] We're using libIEEE1284 I/O
[plustek_pp] Starting Scanner-Autodetection
[plustek_pp] ************ DETECTP48xx ************
[plustek_pp] ModelSet4800()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4800() done.
[plustek_pp] P48xxInitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnEPPRead<
[plustek_pp] MotorInitialize()
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x7e and status=0xe, port=0x0
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Found a 96003 ASIC at Reg 0x13
[plustek_pp] ModelSet4830()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4830() done.
[plustek_pp] Moving 32 bytes to scanner, IODELAY = 0...
[plustek_pp] ... done.
[plustek_pp] p48xxDoTest()
[plustek_pp] Moving 2048 bytes to scanner, IODELAY = 0...
[plustek_pp] ... done.
[plustek_pp] Bank 0 overwritten
[plustek_pp] found 0 bytes of memory
[plustek_pp] No memory ! No scanner...
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Found a 96003 ASIC at Reg 0x13
[plustek_pp] ModelSet4830()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4830() done.
[plustek_pp] Moving 32 bytes to scanner, IODELAY = 1...
[plustek_pp] ... done.
[plustek_pp] p48xxDoTest()
[plustek_pp] Moving 2048 bytes to scanner, IODELAY = 1...
[plustek_pp] ... done.
[plustek_pp] Bank 0 overwritten
[plustek_pp] found 0 bytes of memory
[plustek_pp] No memory ! No scanner...
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Found a 96003 ASIC at Reg 0x13
[plustek_pp] ModelSet4830()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4830() done.
[plustek_pp] Moving 32 bytes to scanner, IODELAY = 2...
[plustek_pp] ... done.
[plustek_pp] p48xxDoTest()
[plustek_pp] Moving 2048 bytes to scanner, IODELAY = 2...
[plustek_pp] ... done.
[plustek_pp] Bank 0 overwritten
[plustek_pp] found 0 bytes of memory
[plustek_pp] No memory ! No scanner...
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Found a 96003 ASIC at Reg 0x13
[plustek_pp] ModelSet4830()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4830() done.
[plustek_pp] Moving 32 bytes to scanner, IODELAY = 3...
[plustek_pp] ... done.
[plustek_pp] p48xxDoTest()
[plustek_pp] Moving 2048 bytes to scanner, IODELAY = 3...
[plustek_pp] ... done.
[plustek_pp] Bank 0 overwritten
[plustek_pp] found 0 bytes of memory
[plustek_pp] No memory ! No scanner...
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Found a 96003 ASIC at Reg 0x13
[plustek_pp] ModelSet4830()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4830() done.
[plustek_pp] Moving 32 bytes to scanner, IODELAY = 4...
[plustek_pp] ... done.
[plustek_pp] p48xxDoTest()
[plustek_pp] Moving 2048 bytes to scanner, IODELAY = 4...
[plustek_pp] ... done.
[plustek_pp] Bank 0 overwritten
[plustek_pp] found 0 bytes of memory
[plustek_pp] No memory ! No scanner...
[plustek_pp] detectScannerConnection() returns -9020.
[plustek_pp] ************* ASIC9800x *************
[plustek_pp] ResetPort()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnEPPRead<
[plustek_pp] ioP98OpenScanPath() failed!
[plustek_pp] IORegisterToScanner - no connection!
[plustek_pp] ASIC = 0x20
[plustek_pp] Unknown ASIC-ID
[plustek_pp] *** DETECTION DONE, result: -9020 ***
[plustek_pp] ptdrvClose()
[plustek_pp] MiscRestorePort()
[plustek_pp] Releasing parport
[plustek_pp] ptdrvShutdown()
[plustek_pp] cleanup device 0
[plustek_pp] open: PtDrvInit failed: -9020
[plustek_pp] open failed: -1
[plustek_pp] sane_open - /dev/parport0
[plustek_pp] attach (/dev/parport0, 0xbfff4fd0, 0xbfff4fcc)
[plustek_pp] Device configuration:
[plustek_pp] device name : ><
[plustek_pp] direct I/O : no
[plustek_pp] warmup : 0s
[plustek_pp] lampOff : 0
[plustek_pp] lampOffOnEnd : no
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] open failed: -1
lt-scanimage: open of device plustek_pp:/dev/parport0 failed: Error during
device I/O
[plustek_pp] sane_exit
Any idea? I'm using suse linux 9.1 and sane from cvs (2004-11-06).
Markus