plustek: Plustek OpticPro 96000P
Subject:
Re: Plustek OpticPro 96000P
From:
Gerhard Jaeger ####@####.####
Date:
16 Nov 2004 07:07:57 +0000
Message-Id: <200411160807.21110.gerhard@gjaeger.de>
Hi,
On Thursday 11 November 2004 21:21, Markus Ehrnsperger wrote:
> Hello,
>
> my paralell port scanner (Plustek OpticPro 96000P) is not working. The lamp
> goes on, but noting else happens. When running scanimage, I get:
>
> ./scanimage -d plustek_pp:/dev/parport0 > xx.png
>
[SNIPSNAP]
> [plustek_pp] attach (parport0, 0xbfff3fb0, (nil))
> [plustek_pp] Device configuration:
> [plustek_pp] device name : >parport0<
> [plustek_pp] direct I/O : yes
> [plustek_pp] warmup : 15s
> [plustek_pp] lampOff : 180
> [plustek_pp] lampOffOnEnd : no
> [plustek_pp] model override: 0
> [plustek_pp] ---------------------
> [plustek_pp] drvopen()
> [plustek_pp] ptdrvInit(0)
> [plustek_pp] Init settings done
> [plustek_pp] ScanData = 0x08052bc0
> [plustek_pp] Assigning port handle 0
> [plustek_pp] ptdrvOpen(port=0x0)
> [plustek_pp] Try to claim the parport
> [plustek_pp] Setting SPP-mode
> [plustek_pp] Setting PS/2-mode
> [plustek_pp] Setting EPP-mode
> [plustek_pp] We're using libIEEE1284 I/O
> [plustek_pp] Starting Scanner-Autodetection
looks good so far...
[SNIPSNAP]
> [plustek_pp] ************ DETECTP48xx ************
> [plustek_pp] ModelSet4800()
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet4800() done.
> [plustek_pp] P48xxInitAsic()
> [plustek_pp] DacInitialize()
> [plustek_pp] ImageInitialize()
> [plustek_pp] IOFuncInitialize()
> [plustek_pp] IOInitialize()
> [plustek_pp] * using readfunction >fnEPPRead<
> [plustek_pp] MotorInitialize()
> [plustek_pp] ResetPort()
> [plustek_pp] Test 0x55
> [plustek_pp] Test 0xAA
> [plustek_pp] Compare data=0x7e and status=0xe, port=0x0
> [plustek_pp] p48xxReadWriteTest()
> [plustek_pp] Found a 96003 ASIC at Reg 0x13
> [plustek_pp] ModelSet4830()
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet4830() done.
detected at least...
[SNIPSNAP]
> [plustek_pp] Moving 2048 bytes to scanner, IODELAY = 4...
> [plustek_pp] ... done.
> [plustek_pp] Bank 0 overwritten
> [plustek_pp] found 0 bytes of memory
> [plustek_pp] No memory ! No scanner...
> [plustek_pp] detectScannerConnection() returns -9020.
now here is the problem. The memory of the device could not be accessed.
I suggest, as first test to set your parport to SPP mode in the BIOS.
Another test could be to set the parport module parameters correctly, i.e.
options parport_pc io=0x378 irq=none
This seems to be needed esp. on Athlon boards.
Hope this helps,
Gerhard
